Diesel Fuel Filter (Model F-18L).
Model F-18L is an inline filter that can be installed on either the vacuum or pressure side of the fuel pump. It will separate water and remove moisture to 40 ppm, particulate removal to one micron and is capable of filtering 18 litres per minute.
Moisture free fuel increases fuel economy and power, reduces smoke emissions and minimizes damage to injector(s). There are many factors which effect fuel consumption, but when an Axail Depth Filter is used anything up to 12.5% reduction in fuel consumption has been experienced.
Nobody, Ever with an Axial Depth Filter has experience fuel contamination issues.
Other:
It has been designed for use with commercial motor vehicles and machinery ranging in size from 160 to 1,500 horsepower engines depending on whether the application is pressure or vacuum. Banking of additional filters is required for engines exceeding 1,500 horsepower.
Pressure and flow rates are governed by the filter medium and should not exceed 650kpa or 18 litres per minute respectively with parallel banking required past these limits.
The connection fittings are standard 3/8” BSP. The change period is dependent on fuel quality, working conditions and amount of moisture removal but a typical filter unit change would be in excess of 50,000 litres and the use of a pressure gauge is recommended but not essential.
Accessories:
Glass Bowl Attachment: This unit is optional but instrumental in sighting and draining free water.
Stainless Steel Mounting Bracket: The same brackets are utilised for both Models.
Filter Bypass Kit: This bypass kit allows for the bypass of fuel if the filter was to be blocked due to lack of maintenance or unsuspected deluge of contaminated fuel.
Guage: The optional guage will indicate when your filter needs changing by displaying the pressure as it builds due to your filter collecting contaminants.
Dont delay, order online for delivery throughout Australia.
Moisture free fuel increases fuel economy and power, reduces smoke emissions and minimizes damage to injector(s). There are many factors which effect fuel consumption, but when an Axail Depth Filter is used anything up to 12.5% reduction in fuel consumption has been experienced.
Nobody, Ever with an Axial Depth Filter has experience fuel contamination issues.
Other:
It has been designed for use with commercial motor vehicles and machinery ranging in size from 160 to 1,500 horsepower engines depending on whether the application is pressure or vacuum. Banking of additional filters is required for engines exceeding 1,500 horsepower.
Pressure and flow rates are governed by the filter medium and should not exceed 650kpa or 18 litres per minute respectively with parallel banking required past these limits.
The connection fittings are standard 3/8” BSP. The change period is dependent on fuel quality, working conditions and amount of moisture removal but a typical filter unit change would be in excess of 50,000 litres and the use of a pressure gauge is recommended but not essential.
Accessories:
Glass Bowl Attachment: This unit is optional but instrumental in sighting and draining free water.
Stainless Steel Mounting Bracket: The same brackets are utilised for both Models.
Filter Bypass Kit: This bypass kit allows for the bypass of fuel if the filter was to be blocked due to lack of maintenance or unsuspected deluge of contaminated fuel.
Guage: The optional guage will indicate when your filter needs changing by displaying the pressure as it builds due to your filter collecting contaminants.
Dont delay, order online for delivery throughout Australia.
Axial Depth Filters.
1/11 Priestley Street Mittagong NSW 2575. Phone: 612 4872 3939 Fax: 612 4872 3938 Email: [email protected]
1/11 Priestley Street Mittagong NSW 2575. Phone: 612 4872 3939 Fax: 612 4872 3938 Email: [email protected]
The content including photos contained in this website is copyright to Axial Depth Filters and may not be copied, distributed or utilised without prior written consent from Axial Depth Filters.