Oil Filter (Model HO-4L).
Model HO-4L is similar in design to Model F-18L and is also able to reduce moisture levels down to 40 ppm, particulate removal to one micron and is capable of filtering an average of four litres of oil per minute.
*An Axial Depth Filter can extend oil life by up to 5 times and eliminate sludging in all diesel engines.
Hydraulic Oil Application:
The HO-4L Pil Filter is recommended for hydraulic systems and in that regard it has the capacity to maintain oil cleanliness up to 1,000 litres reservoir capacity. Axial depth Filters recommends 500 hour oil test and a filter change intervals.
If larger tank capacitites are required then banking of the filters necessary for every 1,000 litres of reservoir capacity.
Engine Oil Application:
It may also be used as a by-pass filter on combustion engines and in that regard it has the capacity to maintain oil cleanliness up to 150 litres oil sump capacity at 250 hour filter change intervals with Banking required for every 150 litres of oil sump capacity.
Other:
Axial Depth Filters Model HO-4L keeps the acid index to acceptable low levels, reduces system wear and the generation of waste oils for both hydraulic and combustion systems. It can be fed from any pressure point on the hydraulic system and has it’s own pressure reduction, however if pressure exceeds 1000 kpa a pressure reduction valve is required at the point of access with a minimum working pressure of 100 kpa. The unit outlet is best returned to the system reservoir. The connection fittings are standard 3/8'' BSP.
Accessories:
Stainless Steel Mounting Bracket: The same brackets are utilised for both Models.
* With regular oil testing and filter changes.
Dont delay, order online for delivery throughout Australia.
*An Axial Depth Filter can extend oil life by up to 5 times and eliminate sludging in all diesel engines.
Hydraulic Oil Application:
The HO-4L Pil Filter is recommended for hydraulic systems and in that regard it has the capacity to maintain oil cleanliness up to 1,000 litres reservoir capacity. Axial depth Filters recommends 500 hour oil test and a filter change intervals.
If larger tank capacitites are required then banking of the filters necessary for every 1,000 litres of reservoir capacity.
Engine Oil Application:
It may also be used as a by-pass filter on combustion engines and in that regard it has the capacity to maintain oil cleanliness up to 150 litres oil sump capacity at 250 hour filter change intervals with Banking required for every 150 litres of oil sump capacity.
Other:
Axial Depth Filters Model HO-4L keeps the acid index to acceptable low levels, reduces system wear and the generation of waste oils for both hydraulic and combustion systems. It can be fed from any pressure point on the hydraulic system and has it’s own pressure reduction, however if pressure exceeds 1000 kpa a pressure reduction valve is required at the point of access with a minimum working pressure of 100 kpa. The unit outlet is best returned to the system reservoir. The connection fittings are standard 3/8'' BSP.
Accessories:
Stainless Steel Mounting Bracket: The same brackets are utilised for both Models.
* With regular oil testing and filter changes.
Dont delay, order online for delivery throughout Australia.
Axial Depth Filters.
1/11 Priestley Street Mittagong NSW 2575. Phone: 612 4872 3939 Fax: 612 4872 3938 Email: [email protected]
1/11 Priestley Street Mittagong NSW 2575. Phone: 612 4872 3939 Fax: 612 4872 3938 Email: [email protected]
The content including photos contained in this website is copyright to Axial Depth Filters and may not be copied, distributed or utilised without prior written consent from Axial Depth Filters.